Solution For HP M254 printer “Consumables problem”
2023-03-25
There are three main reasons for errors:
*First: the machine and the chip connection problem(Communication between the machine and the chip is blocked It causes communication to be disconnected)
*Second: Upgrading problem(HP official updates the firmware on the machine at random times,which makes the compatible chips cannot work)
*Third: The printer itself problem(Error due to DC board failure)
The solution is as follows:
1. First check if the chip is installed in place: whether the chip is loose or the chip is installed on the wrong side(Refer to JYD chip installation diagram)
（Step 2）
2.Check for dirt on the contact points between the chip and the machine,It can be cleaned and wiped
3.If you have more than one chip, try another one(check if it's an isolated case)
4.If the old chip is still retained , install the old chip and do the comparison test(Judge the display of the machine)
5.If you have more than one machine, test it on another machine(check if the machine have problem)
6.Version information is available on screen prints on the chip or on the machine(Determine if it is the upgrade problem)
（Step 2）
After the above methods and judgments, you can solve the error problem of“Consumables problems”
Welcome to the leave message on our website, we will actively help you answer!
Please see the video below：
Learn more about official consultation and chip features
How to test and verify the printer toner cartridge chip? 
how to solve the problem that Consumable location is incorrect? HP printers 251/1215/2025 series 
How to solve the Supply Memory Error HP Printer 25112152025 Series-edition 
Related introduction for Canon MF236/215 series printer counting principle 
How to solve the problem when Canon MF236/215 Series printer says "The remaining toner in the cartridge is seriously insufficient"? 
HP printers always show"Initializing" problems 
How to print "supplies test page" on a HP 150a printer without a display screen 
How to solve the problem when computer pop-up “Not applicable C1-2411”?
