How to install the Xer CP305 series toner chip?
1-Installation method of Xerox cp305 toner chip,Currently differentiated by performance
There are two types of chips-One is dedicated by color | One is four-color universal
1.Color chips,Need to confirm what color the toner is,Then install the chip according to the color
2.Four-color universal chips don’t need to separate by colors,Can be installed at will
2.There are two types of chips
1.One is rectangular like this
（Step 1）
2.One is such that there is a gap
（Step 2）
3-Detailed process：
1.First find the location of the old chip,Pry the slot off,Remove the old chip from the slot
（Step 1）
（Step 2）
2.Paste some double-sided tape on the back of the chip,After tearing off the tape,Chip contacts facing outward,Paste the chip on the positioning cover,
press it tight like this,Then turn the positioning cover of the chip over,Follow this slot Push until the position is locked
（Step 1）
（Step 2）
（Step 3）
Note:The chip is installed.
3-To learn more about the installation steps
Please see the video below：
Learn more about official consultation and chip features
The installation introduction of Lexmark printer compatible MS310 series drum unit chip 
Installation introduction for Lexmark printer compatible toner chip MS310 series chip 
Lexmark printer compatible chip CS310 series drum chip installation introduction 
Lexmark CS310 series printer compatible toner cartridge chips installation introduction 
Installation introduction for Xerox DC286 series copier toner chips 
Installation introduction for Xerox DC286 copier series drum chip 
How to install CF259A CF276A series printer toner cartridge chip? 
How to install Xerox 2270 series copier toner cartridge chip?